What about having the holes elongated to a uni-lug,seems like a machine shop could handle that with ease.
What about having the holes elongated to a uni-lug,seems like a machine shop could handle that with ease.
I would not get the holes elongated as you may be asking for bigger problems. Could be hard to get the studs to lock down and then the wheel may slip and damage the wheel or the studs or both. Seen it happen.
There are wheel shops that can put the ford bolt circle in along the chevy bolt circle. Shouldn't be real expensive but you might want to check that before the first hole is drilled. And if done by a quality shop it should be good forever, just like a new dual bolt circle wheel. I would stay away from welding if possible.
why not just get a hold of rim manufacture and buy the right rim to match the applacation before risking your heath or some one elses rim is probbly the cheapiest thing to do cheaper to buy than pay to have holes filled and redrilled
u.s.INDY WENT OUT OF BUSINESS 20 + YEAR AGO !!!!!!!!!!!
I have done a number of wheels for other people, and never had one come loose yet! You can also buy them that way. I have not seen or heard of one coming loose (That was installed right). One set I did is a pair of 10X15's, and have been on a '68 Dart with a 340 for 6-7 yrs, and he puts the rubber down on the road often!Quote:
Originally Posted by mopar34
Why would it be hard to tighten the lugs? Any aluminum wheel should to be rechecked after some miles are on them, to be sure there set and tight (Don't install wheels with a impack, get out your breaker bar and feel how tight it is).
Pat