Threaded View
-
04-14-2007 07:42 AM #4
Gauge panels are not hard to make.
Here's one that was cut out of an aluminum electrical cable pass-through box.
(Said box used in cement walls etc. for cables to run through. An industrially oriented device you can find at Greybar etc.)
I've made these in brushed, buffed, powder coated and painted.
All cut out from the same box.
The boxes are big enough that you can get several panels from them.C9
I believe this was somewhere around 2015, Rick, Rosie and Johnboy
John Norton aka johnboy