Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Bleeding brakes
          
   
   

Reply To Thread
Results 1 to 15 of 15
  1. #1
    ttommy's Avatar
    ttommy is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2006
    Location
    Brookhaven
    Car Year, Make, Model: 37 Ford, 48 GMC, 03 SSR
    Posts
    13

    Question Bleeding brakes

     



    Can anyone tell me how to bleed my rear brakes by myself?

  2. #2
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.

  3. #3
    lucforce is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2006
    Location
    Mobile
    Posts
    129

    If you need to do this now, and can't get to a vacuum type bleeder, sometimes this gets all the air out:

    1.Fill up master cylinder and close lid
    2.Pump,pump, pump, and pump the brake pedal
    3.Uncover the master cylinder
    4.Open bleeders (one at a time at first, starting with farthest from master)

    If you have lots of air in the line, you may have to cycle through this a few times to get the fluid flowing. However once the fluid is flowing, gravity will work the fluid through the lines.

    5.KEEP AN EYE ON THE FLUID LEVEL, you will have to top it off
    6.Tighten bleeders and fill master to proper level

    Also, tapping on the lines with a wrench can get the fluid flowing to push out air pockets.

  4. #4
    chevydrivin is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2005
    Location
    mccomb
    Car Year, Make, Model: 55 belair: 68 Camaro: 69 F100: 51 M37's
    Posts
    287

    Broom stick.................................pump up brakes put a precut broom handle on the brake pedal up to the seat or stearing wheel that keeps the pedal down. Then go loosen the bleeder......just a little at a time.....don't want the stick to fall out of place.
    I use my 4 yr old to help me bleed my brakes..........got any nieces or nephews you can baby sit LOL.

  5. #5
    lucforce is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2006
    Location
    Mobile
    Posts
    129

    I never had luck bracing the brake pedal. The pedal always relaxed and pulled in air. Come to think of it I have never seen it done-Only heard the stories. hmm... Good myth to test.

  6. #6
    chevydrivin is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2005
    Location
    mccomb
    Car Year, Make, Model: 55 belair: 68 Camaro: 69 F100: 51 M37's
    Posts
    287

    You can't leave the bleeder open too long, just half a second or so, long enough to barely let the pressure off the pedal. This does take several trips back and forth to reset the pedal each time you bleed it.

  7. #7
    cffisher's Avatar
    cffisher is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    Constantine
    Car Year, Make, Model: 57 chevy 2 dr wagon
    Posts
    9,476

    found these jewels at a garage sale about 3 weeks apart. They work great.
    Attached Images
    Charlie
    Lovin' what I do and doing what I love
    Some guys can fix broken NO ONE can fix STUPID
    W8AMR
    http://fishertrains94.webs.com/
    Christian in training

  8. #8
    lucforce is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2006
    Location
    Mobile
    Posts
    129

    "found these jewels at a garage sale about 3 weeks apart. They work great."

    NICE!

  9. #9
    Matt167's Avatar
    Matt167 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Prattsville
    Car Year, Make, Model: '51 Chevy Fleetline and a Ratrod project
    Posts
    4,990

    by yourself. fill the M/C jack up the front, crack both rear bleeders, grab a sanwich, watch some TV, check the forums ( here ) for about 4 or 5 hours, go back, close them up, refill M/C, they'll be bled out by then. called gravity bleeding
    You don't know what you've got til it's gone

    Matt's 1951 Chevy Fleetline- Driver

    1967 Ford Falcon- Sold

    1930's styled hand built ratrod project

    1974 Volkswagen Super Beetle Wolfsburg Edition- sold

  10. #10
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Quote Originally Posted by Matt167
    by yourself. fill the M/C jack up the front, crack both rear bleeders, grab a sanwich, watch some TV, check the forums ( here ) for about 4 or 5 hours, go back, close them up, refill M/C, they'll be bled out by then. called gravity bleeding
    Yup, gravity bleeding works great for me!!!! I prefer chocolate chip cookies over sandwiches, though!!! With a stock car, and the master cylinder above the wheel cylinders it should work fine. Just put a piece of clear plastic hose on them and keep the reservoir full. Good way to get all that old fluid out and new fluid in, too!!!!!!!
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  11. #11
    Charlyg is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2003
    Location
    Fallbrook
    Car Year, Make, Model: 46" Ford 2dr Sedan
    Posts
    146

    ttommy - if you want to spend the money they make self closing bleeders that will let you open up each bleeder and pump the brakes and they won't suck any air back in - not too expensive (I think) - haven't used them but they sound like a good idea - let us knowhow you solve your problem. Good luck, charlyg.

  12. #12
    mizlplix is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2006
    Location
    Chandler
    Car Year, Make, Model: '30 FORD Roadster
    Posts
    22

    When vacuum bleeding or pump bleeding with check valve type bleeder fittings, always use pipe paste on the bleeder threads, or you suck small amounts of air into the system.

    I find that a "little giant" hand held vacuum pump to be good for a "one person" operation.

    Remember, all of that pumping-pumping-pumping of the brake pedal puts wear on all of the M/C parts.....Most racecar techs would hang you if you pump the brakes because it scores an aluminum cylinder easier than a cast iron one.

    Their method is to just press down once, bleed. Release, wait a sec., press down and bleed. It takes a lot of patience, but you wind up with less wear -and-tear on your expensive parts.

  13. #13
    ttommy's Avatar
    ttommy is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2006
    Location
    Brookhaven
    Car Year, Make, Model: 37 Ford, 48 GMC, 03 SSR
    Posts
    13

    You guys are great!!! Out of all the tips I've gotten in the last two days, I think the "gravity bleed" is the one that will work best for me. My next stop is the grocery store for snacks. I've already got my new StreetScene mag. Thanks for all the advice. I'll let y'all know how it works out.

  14. #14
    Hotrod46's Avatar
    Hotrod46 is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2007
    Location
    Vidalia
    Car Year, Make, Model: 1946 Ford Coupe, 1962 Austin Healey 3000
    Posts
    1,499

    Hey Tommy I have a homemade pressure bleeder I'll loan you if you need it. I have to do this stuff by myself all the time. I tried the Mityvac bleeder, but it didn't work well on the rear of the 46. My pressure rig is cobbled together, but it is the easiest thing I have found.

  15. #15
    HemiTCoupe's Avatar
    HemiTCoupe is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2006
    Location
    Deer Lodge
    Car Year, Make, Model: '27 T Coupe
    Posts
    793

    Quote Originally Posted by cffisher
    found these jewels at a garage sale about 3 weeks apart. They work great.
    I have used these over the years, and I still have three of them.
    I make them out of VW beetle Washer bottles, they are pressurized by the spare tire. Just fill them up with brake fluid, and you'll need another master cover. Put a small tubing fitting (any hardware store) in the cover and hook the tube to it, screw the other end to your tire and bleed. I put a wire on it, and hang it on the hood somewhere.

    Just another idea.


    Pat

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink