Printable View
This might be my new project. It's a 1962 Willy's Jeep Wagon. I'm going to check it out Sunday. It's got a 305V8 Chevy with a truck tranny.
http://temp.corvetteforum.net/c3/the..._wagon__6_.jpg
What can I use to get wipers again? Previous owner took the wiper motor out for the 350 Chevy clearance. Any type of electric kit recommended? Are there levers involved?
http://temp.corvetteforum.net/c3/the...gon_engine.jpg
I used VW bug wipers in my 51 Ford Pickup............quite compact.
Here is a link to a list of Willys parts providers. You might start with Willys Works, they have a lot of that kind of stuff.
http://www.public.asu.edu/~grover/willys/parts.html
Using stock parts will be the easiest and cleanest looking installation....if your wiper motor doesnt hit the engine as you said it did....
mike in tucson
Quote:
Originally Posted by poncho62
I was thinking the same thing, and they are really powerful little buggers. Easy to adapt by cutting the shielding tube to whatever length you need, and the motor mounts remotely.
Don
What year VW's?
Beetles, in the '60's '70's. They might even be on Squarbacks. All the common bugs had these.
Don
Thanks.
One of you guys wouldn't happen to have a pic of an install would ya?:3dSMILE:
I don't, but someone else may on here. But it is a really simple setup. If you can envision, it has the two mechanisms that have the splined wiper posts on them, and they are joined together by a spiral cable that turns within a sheath that looks like steel fuel line, then one more piece of this fuel line tubing goes to the motor that is mounted away from the wiper posts. Hard to describe.
Nice thing is you can shorten the sheath to move the posts closer together, or put a longer piece in there to move them further apart, to match up with your car. It was popular to use these a while back on street rods. Look at any bug and you will see how simple they are. Oh, get the relay too, and switch, as bugs have goofy German wiring setups on them.
Don
I had a '67 hot rod bug back in 1970. The wipers aren't what I remember about that car.:3dSMILE:
I do remember it constantly leaking oil and the pump-up windshield washer resivoir. :LOL:
Jeez guy, I just realized I gave you a total bum steer. The wiper assembly I described to you is not VW, I had the system I mentioned on my Austin Healey Sprite. I was totally out in left field. (Old age is a bear sometimes :LOL: )
The VW system is pictured below, and there are quite a few of them on Ebay all the time. You cut and weld the mount to the size of your spacing, and alter the arms and you are good to go.
So sorry for the misinformation. BTW, there may be other systems available in the aftermarket too that work just as well. This is only one option.
Don
Cool, thanks for the info.Quote:
Originally Posted by Itoldyouso