Thread: ford step headers
Results 31 to 44 of 44
LinkBack URL
About LinkBacks-
10-10-2006 04:30 PM #31
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
well.... i did not do much. to damn sore but i did get the driver side out with out pulling up the engine with not to much work it fell out .that allways feels good when you can get the headers out of the car . DON i think on the SANDERSON flange that they are wire burned with edm machine or something like that . they do the bolt holes too. that is why they are cut thru the bolt hole on the sandersons they do all of the job with wire ports and bolts .i will finish the header wednesday and will have more photos. then start on the pass sideLast edited by pat mccarthy; 10-10-2006 at 05:49 PM.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
10-13-2006 12:34 PM #32
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
here is one side done i go over the tubes with an 3m wheel that buff them up to get any marks out of them it more like a red scotch-brite pad and i cup wheel the weldsLast edited by pat mccarthy; 01-08-2007 at 10:35 PM.
-
10-13-2006 12:46 PM #33
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
and some more the header is less than 4 from the long tube and the short tube not to bad so there close. the shaft looks like there is no room but there isLast edited by pat mccarthy; 01-08-2007 at 10:35 PM.
-
10-13-2006 01:00 PM #34
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
thanks denny this is what i do and build and machine engine and headers so when thing get slow i build headers . never am happy with them allways trying to do better but at this time this is the best i can do .here is the inside of the header some thing new on how i did them have put power spears in them but on them i just flatten them and welded them upLast edited by pat mccarthy; 01-08-2007 at 10:35 PM.
-
11-17-2006 05:37 PM #35
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
here is the finshed job working now on the EX
Last edited by pat mccarthy; 01-08-2007 at 10:28 PM.
-
11-17-2006 05:40 PM #36
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
here is some moreLast edited by pat mccarthy; 01-08-2007 at 10:35 PM.
-
11-17-2006 05:52 PM #37
CHR Member
- Join Date
- Jan 2006
- Location
- Constantine
- Car Year, Make, Model: 57 chevy 2 dr wagon
- Posts
- 9,476
Hay Pat
Can you actualy get those headers out of the car??Charlie
Lovin' what I do and doing what I love
Some guys can fix broken NO ONE can fix STUPID
W8AMR
http://fishertrains94.webs.com/
Christian in training
-
11-17-2006 05:57 PM #38
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
yes that one comes out. you have to lift the engine up for this side only BUT customer did not want slip fits and i do not care much for them
Originally Posted by cffisher
-
11-18-2006 03:50 AM #39
CHR Member/Contributor
- Join Date
- Jul 2003
- Location
- Madison
- Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
- Posts
- 21,160
They look great, Pat, Excellent job!!!! Good to see you spending some time on quality Ford Engines once in awhile!!!Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
11-18-2006 08:39 AM #40
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
well thanks dave Originally Posted by Dave Severson
and i bet you heard all of chevy guys are all bad
-
11-18-2006 01:03 PM #41
CHR Member
- Join Date
- Jan 2006
- Location
- Constantine
- Car Year, Make, Model: 57 chevy 2 dr wagon
- Posts
- 9,476
Very nice workCharlie
Lovin' what I do and doing what I love
Some guys can fix broken NO ONE can fix STUPID
W8AMR
http://fishertrains94.webs.com/
Christian in training
-
11-18-2006 01:06 PM #42
CHR Member
- Join Date
- May 2004
- Location
- so.cal
- Car Year, Make, Model: 66 c 10 fleetside longbed
- Posts
- 1,942
10 thumbs up!!!Its gunna take longer than u thought and its gunna cost more too(plan ahead!)
-
11-18-2006 01:30 PM #43
CHR Member/Contributor
- Join Date
- Jul 2003
- Location
- Madison
- Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
- Posts
- 21,160
Originally Posted by pat mccarthy
well thanks dave and i bet you heard all of chevy guys are all bad
Not all bad.... Heck, I have to confess... I have two chebbies in the garage right now.... and one of them is mine... and, I just bought another Camaro this afternoon!!!!!
Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
11-18-2006 01:37 PM #44
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
see praying works Originally Posted by Dave Severson
Not all bad.... Heck, I have to confess... I have two chebbies in the garage right now.... and one of them is mine... and, I just bought another Camaro this afternoon!!!!! i light candles for you ford guys when i am at church
thanks for the nice comments
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
John's ride to the cemetery, his beloved Billings OK bus, The Baby Elephant!! Traveling in style!! As his service was starting I couldn't figure out what the music was, heavy on a flute in a jaunty...
John Norton aka johnboy