ems body panels -52 Chevy 2Dr

In diassenbling my Chevy for paint/color change yesterday, I found some old body work that I need to unfix. The car is a 52 Chevy, 2 dr Sedan. The rear-most potion of the inner rockers needs work. The front section of the quarters have been patched and brazed.

1. What are your comments on EMS for quality and fit of panel.
2. Comments on EMS pricing/customer care policies.
3. Does anyone know of a supplier for the inner rocker panelfor the quarter panel area. (This is not the straight section of the rocker that most suppy.)

bump, bump...bump

what is EMS? All of the body panals sold for the '49-'54's seem to be made by Surplus Supply

www.emsautomotive.com

thanks for the link. it seems as tho to get that curved part of the wheel well, you need the front 1/4 panal section which they sell. The main thing you should look for is being die stamped, which the panals are from EMS. I would call them and see if they make there own or if they get from elsewhere, and if so, who there supplier is.

...still looking for some input...