Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Fly under glass
          
   
   

Reply To Thread
Results 1 to 7 of 7
  1. #1
    parkinator is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2006
    Location
    charlotte
    Car Year, Make, Model: 1962 Studebaker GT Hawk, 350/700R4
    Posts
    15

    Fly under glass

     



    I started to install new AutoMeter gauges in my Hawk and noticed something funny about the voltmeter. The factory had sealed a small fly under the glass. Summit got quite a chuckle out of it and are sending a replacement.

  2. #2
    Bob Parmenter's Avatar
    Bob Parmenter is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2001
    Location
    Salado
    Car Year, Make, Model: 32, 40 Fords,
    Posts
    10,852

    I thought it was Stewart Warner who made the "wings" gauges!
    Your Uncle Bob, Senior Geezer Curmudgeon

    It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.

    Luck occurs when preparation and opportunity converge.

  3. #3
    shawnlee28's Avatar
    shawnlee28 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2004
    Location
    so.cal
    Car Year, Make, Model: 66 c 10 fleetside longbed
    Posts
    1,942

    1 in a million rare factory guage with the fly,ultra rare ,better list it on ebay!!!!
    Its gunna take longer than u thought and its gunna cost more too(plan ahead!)

  4. #4
    BigRed's Avatar
    BigRed is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2005
    Location
    Palestine
    Car Year, Make, Model: '97 Silverado, '87 944, '94 GMC Sierra
    Posts
    64

    Sounds like an Eastern delicacy..."I'll have the fly under glass."
    Wes...aka "BigRed"

  5. #5
    Itoldyouso's Avatar
    Itoldyouso is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    fort myers
    Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
    Posts
    11,033

    Bet the fly isn't real happy about this, either.


    They haven't worked the "bugs" out of this model yet.


    Don

  6. #6
    parkinator is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2006
    Location
    charlotte
    Car Year, Make, Model: 1962 Studebaker GT Hawk, 350/700R4
    Posts
    15

    This car might be jinxed. It was only a couple of weeks ago when I took it to the muffler shop cause one of the mufflers had something loose inside and when you got on the throttle it would rattle really bad. We pounded on the suspect muffler and it made noise. We assumed that the baffle had come unwelded. They cut the mufflers off and replaced them. We looked in the bad one and out came a long handle Stanley 1/2" combination end wrench. It was badly corroded from 400 miles of wear. The wrench is now worth about $150. The previous owner either dropped it down the exhaust pipe during assembly or one of his buddies played a joke on him. Then I came along and bought the car.

  7. #7
    shawnlee28's Avatar
    shawnlee28 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2004
    Location
    so.cal
    Car Year, Make, Model: 66 c 10 fleetside longbed
    Posts
    1,942

    I would install the unique guage in my ride ,just because it would be a conversation piece!!!
    Its gunna take longer than u thought and its gunna cost more too(plan ahead!)

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink