EGR bleed solenoid
I believe thats what its called, its on the back of my intake on my 84 burb w/a 350 w/700R4 tranny. It has 2 vaccum hoses going to it w/an electric plug. I need to know if I can run w/it disconnected w/o having any problems, (like does it have something to do w/my tranny ??? ~~~> see orange section 2nd paragraph http://www.gsdi.org:8088/Tech/700R4/lockup.htm

quote:
--------------------------------------------------------------------------------
When I removed the EGR bleed solenoid and related wiring, I had to rewire my 700R4.
--------------------------------------------------------------------------------


and if I CAN'T what has to be done so I make it work correctly. Because at this time I have to run my spare NON-EGR motor in my truck until I get mine rebuilt and I DON'T want to change my intakes. Its a cost & time factor, "aint got no extra $$$$$$$ to do it & I needed my Burb YESTERDAY ........thanks.......joe

long story short version, son used truck, came home I took off in it, got one block from home then seen white smoke coming out of exhaust. tore it down found 2 blown head gaskets and oilly plugs, so its time for a rebuild after 200,000 plus, hard/abusive miles