Thread: Good tech info?
Results 1 to 10 of 10
LinkBack URL
About LinkBacksThreaded View
-
08-05-2006 07:27 AM #9
CHR Member
- Join Date
- May 2004
- Location
- Ashland
- Car Year, Make, Model: 29 fendered roadster
- Posts
- 2,160
Emo, There you are, Halftanked-Hank made my day with numbers for alignment. Thank you very much Hank, that is very helpful. What books did you buy with this info?
I am glad to see recent posts by C9x. I wanted to thank him for his old posts on using a Caravan seat in an Model A roadster. I cut the legs off the bottom but left stubs and reinforced the bottom with a framework of angle iron and it fits right in there after I took off the side arms; the '29 seems to be a little narrower than the '30 C9 is building. I did not saw off the seatbelt mounts but made short angle iron mounts that attach to the big bolt on the seatbelt mounts and angle over to bolt directly through the frame. The pictures from C9x were really helpful! I plan to use the nice red velvet seat as is for a while with recovering sometime in the future.
Don Shillady
Retired Scientist/teen rodderLast edited by Don Shillady; 08-05-2006 at 07:33 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
".......So sanded it all down and resprayed. ......" Been there. done that on a couple of paint jobs over the years. Usually took me a couple of days to get over being mad before I started...
Stude M5 build