to all you streetroders
when plumbing your rail lines to the rear. should i install a rubber line to the rear axle or just hard line it
Printable View
to all you streetroders
when plumbing your rail lines to the rear. should i install a rubber line to the rear axle or just hard line it
I think you need the rubber portion to allow for suspension movement. Also, i'm pretty sure the rear rubber hose has a dual outlet fitting on one end so plumbing the lines to the wheels is a snap.
Hope that helps!
From the back of the frame, you can run a rubber hose to the axle, then run a hard line across the axle. Or, you can run a hard line around the frame, and run a rubber hose to each wheel cylinder. Your choice. You just need a flex between the frame and the moving suspension parts.