Well these days I would say my air compressor and my airbrushes, followed by a good ole rubber sanding block...
Dave Brisco
Dangerous Designworx
Printable View
Well these days I would say my air compressor and my airbrushes, followed by a good ole rubber sanding block...
Dave Brisco
Dangerous Designworx
Too bad those machines don't come with a broom. lolQuote:
Originally Posted by deepnhock
http://crowbie.awedco.net/wrench.jpg
Having a full set of these rocks so hard.
Killed a few shop vac's pretty quick!:LOL:
Jeff:toocool:
Quote:
Originally Posted by Weeg
Air cut off wheel zzzzzzz zzzzzz
Monica !!!!!
plasma cutter and a big hammer
maybe we should get a "Monica"
man, hard to choose just one, and my shop isn't even set up yet. My first thought was the aceteylene set, it was the first high-dollar investment I made. it is a Smith, and needs new O rings, but hasn't given me a moment of trouble. Except the dam bottles keep running out.. dam... Second tool to come to mind was the little 120V flux-core MIG. It splatters something awful, but is SO handy! the next tool to come to mind would definitely be my 4" angle grinder. With a cut off wheel, it surgically removes cancer, cuts exhast tubing to exact specifications, etc. With a grinder disc it smooths welds, eats bondo, rust, etc. With a knotted wire wheel it strips paint and bondo, and leaves an almost polished finish. But I think that my next major purchase is going to trump them all: an air compressor! it will be so nice to actually be able to use my many air tools!
run your shopvac 'through' a 30 gallon drum. Most of the trash will fall into the drum, greatly increasing the life of the shopvac filter.Quote:
Originally Posted by deepnhock
The Lift I put in My Garage - no more rollin' around on the ground
My homebuilt cherry picker. Second is the sawzall.
Great idea!
Thanks,
Jeff:toocool:
Quote:
Originally Posted by firebird77clone
my favorite tool is either my metabo grinder or my grandfathers creeper
My four inch grinder, my arc welder, my gas torch and my mig. With these I can add metal on, take it off, cut holes, bend steel or shape it any way I want. I would be lost without them.