i forgot to say the cam but its a 292 isky with a 590 exh lift. I cant remember for sure if i did check the float level after the engine was warm but i think so. How would i know if the back and front bowl were changed? I only took it apart 2 times and just did one side at a time so i know i didnt do it but then again, with 2 different carbs, maybe one of them did.
I did replace the base gasket but i have taken the carb on and off like 10 times so i dont know if that matters or not.
A while back i check for some vacuum leaks with some carb cleaner and didnt find anything in the base of the carb or on my vacuum advance line, which now i know the vacuum advance wont even work since i dont have enough vacuum.
I will check the manifold torque but im scared to even start it now since i got gas in there in just 1 minute of running. That just freaks me out. I know i need to check the vacuum around the manifold though.


Thanx again,
david