Originally posted by Hopper111
This This Will Work?
Yeah it looks like those that are labled for use on cylinder heads without accessory holes would work.

Awful pricey; but, as always, your wallet, your build.

On a side note, I have had really good luck with the ones I provided a link to in the first reply. I used a set similar to them in my '55 for years and have never thrown a belt. It aint got tons of torque though and that might be why.

Anyway, like I said before, the ones in the link you provided should also work; but, I don't know that there is any guarentee that they wouldn't throw a belt either.

You may very well indeed be better off, drilling and tapping as others have suggested.

JMO.

Cheers,
Dutch