Hello all - I am running 3/8 steel line (not Stainless) for my '46 Ford - should I single flare or double flare for the fittings? Many thanks in advanve - Charlyg
Printable View
Hello all - I am running 3/8 steel line (not Stainless) for my '46 Ford - should I single flare or double flare for the fittings? Many thanks in advanve - Charlyg
i use the double flare
On steel line definately double flare.
Another tip, if your doing the end of a line that you are planning on slipping a rubber fuel line over, just do the first step for double flaring (i.e. use the die and start the flare). THis will give you a little "bulge" in the line with no sharp edges like the factory plares on the end of a steel line.
Many thanks to those who replied -Double Flare it will be - Charlyg