i have reworked all of my lift points on my goat and have one air bag on the pass side and put the battery on that side to . i have did alot of work on mine made all my chassis parts used a ford 9 rear end . soild bushing. made up new lowers and uppers with rod ends so i can move the pinion angle and made the lowers fully adjustable mounting points front and back of the lower bars and uppers to for more BITE this is the same chassis as yours . but you may not want to do all this. but my car will carry the front wheels in 2 gear on the street .no B.S but not all the time. be for i did all this it hooked good and i had stop hop brakets on the top bars and used gound garbbers on the lower. they replaced the stock lowers bars you may find them by south side to .you will have to make sure if you use the add on ladder bars they do not bind with the stock 4 link . not a big fan of them. stockGM is 4 link and can work better then the add ons ladder bars if you get the stop hops and the lower bars like i said