Originally posted by slowpoke
Also, it would be hard to duplicate the "rolled" edge of the Rod Door panels. I did use some locally purchased ABS to make a rear panel for my 46 bus.cpe. and it worked out well. Joe
The rolled edge is from sanding the plastic. Once you tape the edge foam, the ends are sanded down so that the material doesn't rip after it's glued in place. The foam on the bag side of the edge keeps the material against the door to eliminate the unsitely gaps.

I'd suggest getting the VHS tape from them to start. After getting an idea how it goes together. Then you can decide what you can get cheaper locally and what you want to buy from RodDoors.