Saw blades for thick steel

Printable View

11-09-2005, 01:22 PM
shevy not heme

Saw blades for thick steel

Does anyone know of ' any ' type of hand operated saw that will cut 1/4" steel? I have a cutting torch and I have a grinder but I need to make cuts in areas where I can't use these. I have air saws,electric saws but not having done much frame or structural work I don't know if there are blades available that can cut 1/4 steel.
11-09-2005, 01:31 PM
pat mccarthy

sawzall with a 14 tpi blade 4 1/2 grinder with a cut off wheel .a hack saw the 14 tpi blade work good on steel this thick
11-09-2005, 03:03 PM
shevy not heme

Any particular type or brand sawzall blade that is out there that has teeth that will survive after the first 1" of cutting?
11-09-2005, 03:18 PM
4RE KLR

http://highperformancemailorder.com/...h=825_864_1358

Every kind of saw blade you could ever want
11-09-2005, 04:37 PM
HWORRELL

I usually try and get the milwaukee blades they seem to last a little longer,but I've had decent luck with the Ace Hardware house brand, long as ya don't get the bargain basements you'll be O.K.
11-10-2005, 04:44 AM
m falconstien

try a jig saw with 16 tpi. this is what I use up to 3/8"
11-10-2005, 05:34 AM
Dave Severson

Keep the speed of the saw done. The heat from too fast of blade speed will kill a blade quicker than anything.
11-10-2005, 05:42 AM
hotroddaddy

Milwaukee makes a search & rescue line a blades that are a little beefier than standard ones , ive had good luck with these,they will eat through #5 rebar like butter
11-10-2005, 05:46 AM
hotroddaddy

Also you can get metal cut discs for a 7 1/4 circular saw ,but they burn up quick & make lots of sparks,just like a chop saw
11-10-2005, 08:39 AM
pat mccarthy

Quote:

Originally posted by Dave Severson
Keep the speed of the saw done. The heat from too fast of blade speed will kill a blade quicker than anything.

and try not to bind the sawzall or saw. the blade will bend and it take out the set on the teeth of the blade
11-10-2005, 01:15 PM
76GMC1500

I use a 4.5" grinder with a cut off wheel for most of my metal cutting needs.
11-10-2005, 06:46 PM
techinspector1

Sawzall with 14 tpi Milwaukee blades, my number one tool.
11-14-2005, 12:13 AM
firebird77clone

use a recip saw with variable speed, and run it slow. It also helps to spray the blade with WD 40 while cutting. If the blade is smoking the oil, then you're getting it too hot.

I had to cut through a 1" stainless steel flange once, about 6" long. It took six blades and a can of WD. ( had a helper spray while I cut ) but the job got done.