Threaded View
-
08-28-2005 05:31 AM #1
V6 90 degree vs 60 degree engines question
I have been scanning everything I can on the 231 engine and even took the advise of some on this board in purchasing a lot of old 70-80 Hot Rod magazines to see about V6 swaps when they did them back in the last gas crisis. Yes, indeed, I found some great articles and I am in the planning process of getting things going. Personally, I like the 231 and a 350 tranny combo so far. However, I also found articles on the other to read about as well.
My questions are, which engine is most preferred for a V6? Are they both about the same in stock mode? What about availability of parts or even a junkyard engine that may be of use? Is there any big difference between the two engines? I don't mean any parts swap, but mean ease of swap into a Model A, power and performance or any special modifications necessary to make it all work.
I was reading another thread about Mavrick and Granada rear ends working well for the 231. I am probably looking for a '79-'84 engine, but Novak says the electronic stuff can easily be bypassed on a later engine to make it work. However, the cars I have seen with the Buick V6 so far have pretty well been '79 models. Any special difference in the Maverick and Granada rear ends. This will be a tudor street machine that is solely for daily driving and good economy; not for neck-breaking take offs or speed.
Who all runs a 231 in their Model A at this site?
Thanks for any input on the two engines or the questions above,
Huey
John's ride to the cemetery, his beloved Billings OK bus, The Baby Elephant!! Traveling in style!! As his service was starting I couldn't figure out what the music was, heavy on a flute in a jaunty...
John Norton aka johnboy