Printable View
i put a ls1 in my 55 nomad and used the stock ls1 radiator and fans with the painless relays for contoling the fans and need to know what size inline fuse to use and if i should run 12 volts to each fan seperatly.any help would be appreciated. donls1 electric fan help
Not sure what size fuse for your application,,,,,but if it where me,,,i'd wire the fans seperately,,,that way if one pop's a fuse the other will be running.
I'm running twin 10" fans on a 427 Camaro, I wired the fans seperatly. I am using a relay and circuit breaker (30amp) for each, I also staggered the fan switches one comes on at 180 deg the second comes on at 195deg even in the hot florida summers the car never runs over 200deg
I am doing an LS1 swap into a 1953 Studebaker, but have not gotten to the fan wiring stage yet. A great place to get LS1 answers is here:
http://www.ls1tech.com/forums/
Go to the Conversions and Hybrids forum. There is bound to be someone there who can aanswer your question.
Pat