Thread: 34 chevy chassis question
Results 1 to 2 of 2
LinkBack URL
About LinkBacks-
06-30-2005 09:13 PM #1
CHR Member
- Join Date
- Jun 2005
- Location
- tucson
- Posts
- 4
34 chevy chassis question
Hey guys
I have a 34 chevy 3 /w, I just pulled the body of today and started getting the frame ready to go to the media blaster.
The frame is in good shape and it doesn`t look like its been in any wrecks but when I started measuring the frame to make sure it was straight and square I found that it was off by a 1/4 in. when measured from corner to opposite rear corner (basicaly the x pattern). I was just wondering if you guys think this is within tolerance for a frame this age or should I try to get it dead on square?
Thanks in advance
bryan
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
07-01-2005 04:28 AM #2
CHR Member/Contributor
- Join Date
- Jul 2003
- Location
- Madison
- Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
- Posts
- 21,160
It would be good to get the frame squared up, but more importantly are the wheels square when you measure them???Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
i spin the wheel and mark center, then set it back down. i have 2 pieces of smooth tin i set the tires on so i can turn side to side to check it. real easy to get off when dealing with 1/4 inch.
Toe Adjustment