Thread: Holly 4160 600cfm carb
Results 1 to 2 of 2
LinkBack URL
About LinkBacksHybrid View
-
05-08-2005 02:36 PM #1
CHR Member
- Join Date
- Oct 2004
- Location
- Eagle Mountain
- Car Year, Make, Model: 1929 Ford Coupe & 1947 IHC Pickup
- Posts
- 145
Holly 4160 600cfm carb
OK, any experts on carburator linkage setup? I have a new 350 crate engine equipped with a Holley 4160 carb. I have installed the bracket to hold the AT kickdown cable and will soon purchase a new throttle cable.... Anyone been thru this before.
What goes where? What additional fittings are needed? etc....
Any pics of carb setup availablejc
-
05-11-2005 04:58 AM #2
CHR Member
- Join Date
- Nov 2003
- Location
- bluff dale texas
- Car Year, Make, Model: 47 inderweed
- Posts
- 2,126
i would go with the lokar setup. it fits and stays adjusted. the factory plastic one will pull thru when you floor it. make sure your full throttle on the carb does not exceed the throttle preasure cable travel. the trow on the holley is more than the cable will travel.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance