Truck is not running... Just checked the inj's the CORRECT way!... I have .04 on the 467 & 468. The only reading i get out of D16 & D14 is a -1, otherwise I get no reading at all
Printable View
Truck is not running... Just checked the inj's the CORRECT way!... I have .04 on the 467 & 468. The only reading i get out of D16 & D14 is a -1, otherwise I get no reading at all
sorry, did not test the D pins right. I will do that and let you know
lets start all over, do you have a "noid light" and a "test light" . 2 dif things.Quote:
Originally posted by Fonzy
Truck is not running... Just checked the inj's the CORRECT way!... I have .04 on the 467 & 468. The only reading i get out of D16 & D14 is a -1, otherwise I get no reading at all
Yes, I have both.
the noid light burn all the time?Quote:
Originally posted by Fonzy
Yes, I have both.
I'm going to check it again but last time i checked it, it didn't come on at all when I tried to start it. I'm going up in a few mins to check it again though. My girlfriend is going to be a relay between the home computer and me at Wal-mart...
BTW I checked the D16 and D14 against a ground and didn't get any reading...
need to know what the noid light is doing
Noid light does not come on at all... Just like the first time...
check red wire at inj. with key on with test light. is light on?
Yep, it's on.
disconnect the 4 way plug at the dist. take the 12v test light and hook it to the postive side of the bat. and touch the purple/white wire going to the computer with the test probe end of the light light. ever time you touch it the noid light should flash.
Noid light is flashing.
if everything check the way you say it does then you either have a bad plug at dist. or the module is bad. id say module.
He's on his way to AutoZone now, to see if he can pick up a module...then he'll let you know what happens!
Thanks a bunch for your help, I know he appreciates it!
~Fonzy's girl~