Completely Confused

[my61chevy]

I have a 1961 chevy pickup. No power steering, power brakes, and it had torsion bars. I took out everything off the front, a arms, motor everything. I put up a front end off a 1986 chevy 1/2 2wd. Frame is up, shocks mounted spindles in, know im trying to figure out how the heck you get the power steering gear box mounted and all the tie rods, etc. hooked up so this works. Pictures would be awesome if anyone has any or find some please get back with me. thanks for your time.

[FMXhellraiser]

Well I would get a whole new bushing and ball joint kid from www.p-s-t.com. On the upper and lower arms you will have to take the rivets off by either heating them up and getting a air chizle or try and cut them off somehow and the new ones will bolt right in. On the steering box, you will need the one of the front end you put on. If you don't go that route you may be able to fab up custom brackets, etc to make it work but I would have to look at it to give anymore info or help.