Thread: Mopar 8 3/4 center section
Results 1 to 1 of 1
LinkBack URL
About LinkBacks-
04-07-2005 05:59 PM #1
CHR Member
- Join Date
- Oct 2004
- Location
- Int'l Falls
- Car Year, Make, Model: 1973 Dodge Challenger
- Posts
- 5
Mopar 8 3/4 center section
Can anyone give me a place to look on the net for some tips on rebuilding a 489 case. I'm putting a new set of gears in an empty case. I have a rebuild kit with pinion and differential bearings, gaskets and seals, crush sleeve and sealant. I have a magnetic base dial indicator and I'm guessing I have or have access to all necessary tools. I'm just a little uneducated in the fine touches on setting the pinion depth.
I found this if anyone else is interested.
http://www.moparmusclemagazine.com/h...ar/index1.htmlLast edited by Mopar340; 04-15-2005 at 11:55 AM.
Brian
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
On a bitterly cold winter morning a husband and wife were listening to the radio during breakfast. They heard the announcer say, "We are going to have 8 to 10 inches of snow today. You must park...
the Official CHR joke page duel