Results 1 to 3 of 3
LinkBack URL
About LinkBacksHybrid View
-
03-05-2005 10:23 AM #1
CHR Member
- Join Date
- Feb 2004
- Location
- Barrie-Ontario-Canada
- Car Year, Make, Model: 1931 Roadster Pickup
- Posts
- 2,016
What does the junction block for rear flex. brakeline bolt to on S10 rearend
Yeah, I know, kind of a dumb question, but there is a flange around the rearend cover that sort of precludes using one of the cover bolts. I picked up a new flex line this morning to run from the frame crossmember down to the rearend, and there doesn't seem to be any specific location to mount the other end on the S10 rearend unless I remove a rearend cover bolt and put in a stud instead, then double nut it. Anybody know???Old guy hot rodder
-
03-05-2005 10:41 AM #2
CHR Member
- Join Date
- Feb 2004
- Location
- Peterborough
- Car Year, Make, Model: 86 GMC S-15 SBC powered
- Posts
- 65
If you look at the upper left side of the diff cover yo will see a cut out in thr flange. An "L" shaped bracket is used to hold the flex line, the bracket is held on by one of the diff cover bolts.I've got the itch to lay some rubber down!!! ~Thanks grampa! its been 10 years worth of work, I just wish you could see it~
-
03-05-2005 12:53 PM #3
CHR Member
- Join Date
- Feb 2004
- Location
- Barrie-Ontario-Canada
- Car Year, Make, Model: 1931 Roadster Pickup
- Posts
- 2,016
O.K. Guys---made a bracket from 3/16" plate and it worked fine---thanks.Old guy hot rodder
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
That's going to be nice, like the color. .
Stude M5 build