Brake and clutch lines Diablo

Hello,
My name is Greg Reynolds. I'm building a replica Lamborghini Diablo and it needs a brake line system. I have made a few illustrations of how I think it should work. My lack of knowledge on this subject has lead me to this site for help.

I know I should be using 3/16 lines but that is about it. I'm using C-5 Corvette calpiers. A Ford Explorer master cylinder and booster to run the system. And a Jeep Cherake clutch cylinder for the clutch. Connectors T's etc is where I get lost. Also someone recommended I add valves to the line for more controlled flow. This may be wrong.

Then there is the Pontiac Fiero e-brake and the cabling to the parking brake calipers.

Any suggestions on dealers, parts houses, custom shops in Dallas,TX, etc would be greatly appreciated.

Sincerely,

Greg Reynolds




http://www.kitcentral.com/albums/alb...sis_2_6_05.jpg

http://www.kitcentral.com/albums/alb...rame_lines.jpg
http://www.kitcentral.com/albums/alb...rake_frame.jpg

Thanks for the info!

Greg