Thread: Ringgear & Pinion
-
01-24-2005 04:52 PM #1
Ringgear & Pinion
I HAVE A 79 CAMARO 10 BOLT, TO INSTALL A NEW GEAR HOW DO I FIND OUT THE CURENT RATIO,AND DO I NEED TO CHANGE THE CARRIER LOOKING TO PUT IN A 410 OR 456 GEAR.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-24-2005 05:16 PM #2
Re: Ringgear & Pinion
Originally posted by littlerock
I HAVE A 79 CAMARO 10 BOLT, TO INSTALL A NEW GEAR HOW DO I FIND OUT THE CURENT RATIO,AND DO I NEED TO CHANGE THE CARRIER LOOKING TO PUT IN A 410 OR 456 GEAR.
a 4:10 set up will have a ring gear with 41 teeth and the pinion will have 10 teeth. can use the same carrier.Last edited by lt1s10; 01-24-2005 at 05:23 PM.
Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
01-24-2005 05:21 PM #3
THANKS A LOT FOR THE INFO..
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance