Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Air Compressor CFM Question
          
   
   

Reply To Thread
Results 1 to 6 of 6
  1. #1
    70runner is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2004
    Location
    Powers Lake
    Car Year, Make, Model: 70 roadrunner, 73 charger
    Posts
    6

    Air Compressor CFM Question

     



    I have a 25 gallon 5hp compressor. I also have two 25 gallon air tanks. If I run these in-line so I increase my capacity will that increase my cfm so I can use air tools that require more air?

    Thanks,
    Pete

  2. #2
    tcodi's Avatar
    tcodi is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    parkesburg
    Car Year, Make, Model: 1950 chevy pickup
    Posts
    580

    theoretically, for a short period of time your cfm capability will be higher. (for instance, if you dumped both tanks over a period of a minute, you would have had about 30 cfm, but the pressure wouldn't be consistent).
    In reality you couldn't get that much through wimpy little 3/8 air lines, but you could run tons of air for the short period of time that the tanks will be charged. . . .then you rely on the motor.

  3. #3
    70runner is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2004
    Location
    Powers Lake
    Car Year, Make, Model: 70 roadrunner, 73 charger
    Posts
    6

    Thanks for the responses,

    what if I run two 5hp air compressors into a central tank. Will the cfm be higher? Would it then be equal to the two output cfms added together?

  4. #4
    Bob Parmenter's Avatar
    Bob Parmenter is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2001
    Location
    Salado
    Car Year, Make, Model: 32, 40 Fords,
    Posts
    10,866

    Cfm is a function of the pump output, not the storage vessel size. With more storage you'll be able to work longer the first time, but then it'll take longer to refill. Two compressors will theoretically fill twice as fast, but each is still only putting out what it is built to do. If you want more cfm, get a high cfm pump and motor adequate to drive it. With a 6 cfm pump you won't keep up with a sander, HVLP gun, or any of the other high volume users.

    e.g. My compressor does 24 cfm @ 100psi. I can be using a d.a. sander, empty the 80 gallon tank, and it refills in less than 4 minutes. In real operation it doesn't empty the tank before it restarts the pump. The benefit of a high volume pump is, it will refill the tank WHILE I'm still using a high volume air hog like the d.a.
    Your Uncle Bob, Senior Geezer Curmudgeon

    It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.

    Luck occurs when preparation and opportunity converge.

  5. #5
    Henry Rifle's Avatar
    Henry Rifle is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2004
    Location
    Little Elm
    Car Year, Make, Model: 34 Ford Low Boy w/ZZ430 Clone
    Posts
    3,890

    Bob's right on. More tanks only means you get more time to run the DA, but it takes an equal amount of time to fill the tank after it goes "flat." You get no net gain in work time.
    what if I run two 5hp air compressors into a central tank. Will the cfm be higher? Would it then be equal to the two output cfms added together?
    Yep. Compressors in parallel are additive - or at least theoretically. The flow not work out to be twice the as much as one, but it will certainly be more than you get from a single unit.

    I've seen several shops with more than one compressor feeding a single line.

    If that's all you have, I'd give it a shot and see what happens.
    Jack

    Gone to Texas

  6. #6
    robot's Avatar
    robot is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    Tucson
    Car Year, Make, Model: 39 Ford Coupe, 32 Ford Roadster
    Posts
    2,334

    Bob, give 'em the water analogy......city builds another 1 million gallon tank, does it mean your shower drowns you?

    You put in 2 inch pipe instead of your 1/2 Home Depot stuff

    Your meter pressure regulator breaks and you get 125psi water.

    all three different

    mike in tucson

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink