Denny--I don't think that I could add them between the headlight and the end of the bar that attaches to the fender, as this portion of the bar is a solid forging. The 2 forged outer ends are attached by a hollow tube which starts just inboard from the center of each forged light "cup" which are in the forged ends. I am using the headlight bar off a 28/29, and it is a straight center tube, not curved like the 30/31 model A's. If I was rich instead of good looking, I would buy a set of the 32-34 commercial headlights which can be ordered with a set of signal lights built into the housings. (the signal light hides behind the headlight lens and is only visible when turned on). Trouble is, a set of those babies is over $300, whereas a set of chrome king-bees with 7" sealed beams and no signal are less than $100