Matt, I think I see what you mean. See the thing I saw on Hp TV was something like that but one in front and one in back and chained it up and had a winch in the front and back to lift the car. I can by some wheels from Home Depot and making something and try and see about getting metal and for how much. I can try and find left over scrap metal that is long enough or even if I still have to buy some then I can use the short stuff. I will maybe use round tubing or something. Only thing is that I will need to see how to hook up the chains to be able to lift the car and also make sure the whole frame thing will roll right over the chassis and be wide enough too. Also I am not painting the frame until the car is narrowed, suspension on, rear end on and ride height set and body mounted on once and get it all to fit well then take the body off, everything else too and then paint it and poweder coat all the other parts. Hopefully someone else has some ideas on the chain thing too. I wish I saw how the winch was hooked up on the show and then I could try and copy how it was done but I have no clue how they did it now.