Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Search:

Type: Posts; User: pat mccarthy

Search: Search took 0.04 seconds.
  1. Replies
    13
    Views
    18,005

    9to1 will be hard O deck the block use a 039...

    9to1 will be hard O deck the block use a 039 head gasket with a 4.370 bore .heads will need to be 110 cc it will be around 8.6
  2. Replies
    13
    Views
    18,005

    no not to small of chambers 4.610 bore by 5.500...

    no not to small of chambers 4.610 bore by 5.500 crank
  3. Replies
    13
    Views
    18,005

    all bbc heads have screw in studs and guilde...

    all bbc heads have screw in studs and guilde plates
  4. Replies
    13
    Views
    18,005

    well i would not run it any more then .038 from...

    well i would not run it any more then .038 from deck . big pistons can rock if you have some piston to wall .you said you were going to a thin gasket . you can used a gasket with a smaller bore size...
  5. Replies
    13
    Views
    18,005

    yes it can be 550 lift is not bad but it the DUR...

    yes it can be 550 lift is not bad but it the DUR and lobe sep + lift that can added up to no piston to valve . you taking better then a total of.040 off heads .gasket and deck .thats less pv room
  6. Replies
    13
    Views
    18,005

    well the small cam will work better with the low...

    well the small cam will work better with the low CR . and the small ports may slow you down BUT .... you need more cr to go with more any thing as i see it .so i not shure how nuts your going with...
  7. Replies
    13
    Views
    18,005

    yep i have used them heads .i am doing a build...

    yep i have used them heads .i am doing a build right now with a set but i am going to 2.250 1.880 with 11/32 stems will be a 496. why flat top pistons ? you not going to put much cam in it that...
Results 1 to 7 of 7
Links monetized by VigLink