Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Search:

Type: Posts; User: thesals

Search: Search took 0.03 seconds.
  1. Replies
    29
    Views
    9,620

    HV oil pump is no good with your stock pan,...

    HV oil pump is no good with your stock pan, you're going to run the pan dry unless you at least add a crank scraper.... if you're going to add a cam to that motor, you should probably match to your...
  2. Replies
    29
    Views
    9,620

    yes sireee dave, i experienced it when i put a...

    yes sireee dave, i experienced it when i put a 478 lift cam in my motor, ripped all the rocker studs out, what a PITA..... so i ended up going to a newer set of heads that were ported and polished...
  3. Replies
    29
    Views
    9,620

    yes thats a safe lift cam for a 289, as long as...

    yes thats a safe lift cam for a 289, as long as you match your valve springs a stock head should be able to flow that decently.... i would reccomend upgrading to roller rockers though, i've had...
  4. Replies
    29
    Views
    9,620

    well i'm sure you can get into the .600s in lift...

    well i'm sure you can get into the .600s in lift if you want, but over .500 is risking valve clearance issues with the pistons on a 289... what are the specs of everything else in your motor and...
Results 1 to 4 of 4
Links monetized by VigLink