Search:

Well awesome! If you can swing 4th of July weekend Goodguys is then. It's a good time. Hopefully all this stuff is blown over by then.

If you ever get up this way, there is a very nice drive in theater in Newton Iowa.

All of this CV stuff going on has a guy really bummed out. Hopefully it is better before June. I'm going to be hostile that I actually have 2 things drive able to take to my favorite show 4th of July...

The seat looks great and good deal to hear it drives great and you're putting miles on it!

It looks really nice! I'm betting the open diff will help keep it from going really sideways but you will be the first one to find out. :LOL:

Just awesome! I'm very glad you were able to get through the titling process without too many issues. Also a big congrats on driving it the first time. It sure is a good feeling isn't it?

That's what really matters! You'll get to cruise it soon enough down there. :LOL:

Great work and craftiness! It is looking real nice. Are you still under your target goal on the budget? (I can never accomplish that)

How is it increasing resistance? You use the solenoid to send the voltage down the battery cable to the starter during cranking only so the cable isn't hot the entire time. I was joking about saving...

I think most people that use the ford solenoid as a remote unit are doing so when they move their battery from stock so they don't have a large hot battery cable running from one end of the car to...

You're doing really well on your budget! I always blow mine because I can't leave anything alone. :LOL:

Nice work! I can relate on how much time and how many times you have to revise something like this. I'e built a couple in 4x4 trucks when I put a dodge trans in a chevy. Nice work!

I almost bought an auto meter GPS speedo to match the gauges in the camaro. I just can't justify the price on it when I have a gps that can go in whatever vehicle I'm going to drive. The speedo may...

I need to find something to put in my T10 to run my auto meter speedo. I haven't even researched that part yet. :LOL:

That seat looks like something we used to have in an old cage cart. My butt hurts thinking about it. :LOL: Do you plan to weld the lower u joint to your shaft or?

Nice work on the bucket!

Progress is progress. :LOL:

Very nice fence work. Our small Husky climbs our 4 foot fence with ease. What a PITA she is! :LOL:

That's a very good point. That's why the boat manufacturers covered all the plywood in the fiberglass boats.

That is a cool little rack. I'm curious if it will have enough travel to turn the straight axle lock to lock?

It looks nice! Do you plan to go with a pick up type bed or a turtle deck?

Oh really? There's no high force load on a drag link or tie rod and tube at a knuckle? I beg to differ. I like how you're calling the tie rod stud insufficient but then blame his mount that will fail...

Jerry, care to elaborate on which component that is freaking you out there?

Nice work. The tie rods are a cheap alternative. I never really thought about using them for link ends.

Nice work and adapting to changes!