Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Search:

Type: Posts; User: jerry clayton

Search: Search took 0.04 seconds.
  1. Another tip------since you have pretty well...

    Another tip------since you have pretty well proven that its rings sealing, plus other areas of questionable work---------an method of rapid ring seating used by pro stock racers back in early...
  2. I would personally at this point (even earlier)...

    I would personally at this point (even earlier) to remove engine and go thru it completely. New rings, bearings, cam bearings, recond rods , correct bolts, torque plate hone cylinders ( possibly to...
  3. What clearance are you using for valve settings?...

    What clearance are you using for valve settings?

    Seems to me that where your at not wanting to take the engine down-Bon Ami over the venture that feeds the #6---------


    ALSO--------change that...
  4. Since you have Ford oem adjustable...

    Since you have Ford oem adjustable rockers---------------is your block even drilled for the lifter galleys??? and/or the plugs in the galley??????
  5. Bon Ami isn't abrasive----------the old adds used...

    Bon Ami isn't abrasive----------the old adds used to towt "never a scratch"

    Any way-BA has over the years been used on varius lapping in opts-----you sprinkle it above the carb while you rev up...
  6. Does any one know what that shop has for...

    Does any one know what that shop has for bore/hone opts????


    Since some cyliders don't seem too bad, maybe some rings are on upside down and/or wrong groove??? Anywy-a couple dollars for some...
  7. SOOOOOOOOOOOOOOO--What oils/lubes did you...

    SOOOOOOOOOOOOOOO--What oils/lubes did you use????????????

    AND_________do you know what BON AMI is???????
  8. I've been reading thru all your other posts and...

    I've been reading thru all your other posts and find many questions that you haven't answered even tho some were repeatedly asked---Like what oil did you put in the motor and what assembly lube used...
  9. Cylinder leakage test is what you need to do-do...

    Cylinder leakage test is what you need to do-do you have an air compressor and leakage guage?


    and do you know how to do it???
  10. That pic doesn't show rocker assembly and/or...

    That pic doesn't show rocker assembly and/or rocker baffles-------------and a pic of shaft portion of distributor?????

    And that's not a CAmaro in the avator -------Its a Monza with an aviator ...
  11. So since you haven't done much from advice...

    So since you haven't done much from advice given-I'm sorta like ?????? But if you want to specificly follow some suggestions step by step in an A B A type order?????????

    First , lets just...
Results 1 to 11 of 11
Links monetized by VigLink