Search:

i never could get the engine to start again and could hardly turn it over by hand. so we pulled it out and put another 460 in and it started, but when we finished it up to test drive it ran for about...

we had it running for about 1.5 minutes. sounded good. but never has started since. maybe solid lifters to tight? we did put some lash

we where also thinking that there might be a resistor of some type on the 59 ford that would be making the spark not get as much power?

150 is what the compression says. is there somthing else that it would be?
got me puzzled

the engine wont start agin after the first and only time that is did awhile back. i think the cam is to big. 655. we went with a 600 cfmm carb and still have to pump the crap out of it.. thenn whennn...

changed the carb to a 750cfm, then removed the distrib. and moved it a couple of gears over, could not adjust anymore it would hit the intake while it was almost starting. then she fired right up....

Put on the new mini high torque starter double checked the timming put on a super coil. got plenty of spark now check all plugs. almost started. after we try to start it and leave it set for approx 2...

I have checked the spark it is good, getting plenty of fuel, (maybe too much?), the engine turns pretty easy by hand, we have checked the timing numerous times. ihave orderd a high torque mini...

I have a 78 460 with 68 heads that have been ported with oversize valves. the engine has been balanced. it has a wieand high rise intake, a holly carb that has been rebuilt to an 875 cfm, 655/655...