Search:

Here's a photo of the console from a '75-'80 Nova, also fits Buick Skylark, Olds Omega and Pontiac Venture.
1975 Chevy Nova at Floor Shift Console Skylark Omega Venture 1976 1978 1979 1977 | eBay
...

http://www.summitracing.com/parts/edl-7235/overview/
http://www.summitracing.com/parts/edl-7116/overview/make/chevrolet

.

On the other side of horrible. The Beach Boys, they ain't.


.

You might be right Ken, I just have never seen a dyno flog with either of those numbers.

.

Thanks Roger. Looks like about 230 cfm @ 0.400" intake valve lift, so if you had enough cubic inches suckin' through 'em, they should be capable of making 450+ hp. With this little 327, I might...

If I had some valid flow numbers on the heads, I might venture a guess on hp and torque. The cam will pull to 6000, so that would be a nice round figure to set the rev limit of the motor.

.

Edelbrock #7101 for conventional Gen I heads mounting a square-bore carburetor. The very same manifold can be had under Holley part #300-36 and Weiand 8016. Neither of those manifolds is being made...

You don't know the half of it.

.

GM says it will work fine in a +0.030" motor. That's according to the forum at Scoggin-Dickey Chevrolet.

.

OK, first things first.....
A production 327 block will have a block deck height of ~9.025 (blueprint measurement).
Your task is to find a "stack" of parts that will fit into this space, then cut...