Search:
Type: Posts; User: pat mccarthy
-
07-27-2009 08:18 PM
Thread: distributer shims?
by pat mccarthy- Replies
- 6
- Views
- 1,596
no just use a small amont on the cam gear put it...
no just use a small amont on the cam gear put it on with a brush or finger you can use a red marker like a big sharpie but this way works only on very clean dist gear wash it good you can try this...
-
07-27-2009 07:26 PM
Thread: distributer shims?
by pat mccarthy- Replies
- 6
- Views
- 1,596
i would crank it thru by hand with plugs out lay...
i would crank it thru by hand with plugs out lay out paste can be pickup at a parts store (prussian blue ) or go to a art store and buy a tube of yellow oil base paint a small bit will go along way
-
07-27-2009 06:43 PM
Thread: distributer shims?
by pat mccarthy- Replies
- 6
- Views
- 1,596
should check the gear that the dist grear is on...
should check the gear that the dist grear is on running off the cam up or down if a stock dist you can put some layout past on the gear drop it in crank around and look at were it lays out should be...
i spin the wheel and mark center, then set it back down. i have 2 pieces of smooth tin i set the tires on so i can turn side to side to check it. real easy to get off when dealing with 1/4 inch.
Toe Adjustment