34 chevy 4dr

hope to soon get back on my build and my neighbors build
frame parts are on the ground, welder/grinder is idle.
but my buddy decided to start an engine build too hard to do that and grind and weld in the same area.
but this is the plan the 34 has already been de-wooded and stiffened
doors are tacked shut now, but we did come into a great idea that may help some while we each wrench engines.
we got a 95gt stang 4link 8.8 and cut and grafted it under the backside of the 34 w/47"plus or minus width clearance he cut and scribed this to fit. need to modify the stablizer shock for the 4link. now to line up the body and fit it to the wheel size is next along with the hand built frame.
the whole plan is to take the 4th doors weld shut cut the window rails and make a sedan delivery, this will allow to set the seats back too.
room for one of his 56 or 57 Hemi's and tranny with a straight front axle

sounds like a nice build.

that is almost what my dodge is going to be like. my plan was to go simple, but it ballooned into a major project.:eek:

good luck on the car. can you post post some pics?

later:toocool: