Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: my 63 ranchero rat rod in progress
          
   
   

Results 1 to 15 of 23

Threaded View

  1. #7
    treekiller's Avatar
    treekiller is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2003
    Location
    eastern part
    Car Year, Make, Model: 1934 Schwinn
    Posts
    747

    don't know Dave, they're still there.
    http://www.komaradio.com/


    sdobbs20--
    so far i've had to rebuild the carb, get the gas tank chemically cleaned, install/bend a new fuel line, redone all 4 brakes, new master cylinder, new fuel pump, some rear axle seals, and we had to cut off the exhaust pipe because it was clogged and overheating, so had to take off exhaust manifold to make sure it was good; it was. we just finished welding in some floorboards since the original ones were rusted through to the ground.
    It is nice to read that you didn't change the rims and radio then worry about all the rest.
    How are you planing to lower the front suspension? "air ride?"

    TL
    Last edited by treekiller; 06-14-2007 at 08:18 AM.
    "Whad'ya want for nuth'N, ..............aaa,rrrrrubber biscuit... ?"

    "bad spellers of the word untie ! "

    If your wondering how I'm doing I'm > " I'm still pick'N up the shinny stuff and passing open windows "

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink