Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Model A Ratrod -- what's a good drivetrain donor car?
          
   
   

Reply To Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 20
  1. #1
    PeteRatCoupe is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2006
    Location
    BOSTON
    Car Year, Make, Model: Not Yet
    Posts
    11

    Model A Ratrod -- what's a good drivetrain donor car?

     



    Hi all,
    I picked up a 30 Model A 5 window coupe project. It's rough, but I have more time than money.

    So my thoughts now go to a good donor car. I'm thinking something I can have sit outside, and take motor, tranny, rear axle, sheet metal for patch panels, and all the little bits and parts that come along that you need to build a ratrod, that a parts car would be good for.

    So, thinking Chevy small block and auto tranny, what's the best donor vehicle considering rear axle width for my coupe, and a good tranny (TH350?).

    I tried to do a search here in a bunch of the different forums, but I didn't really get much info. Most seem to think an 8" ford rear end is good, and won't need to be narrowed, but I'd prefer chevy small block power, and I'm looking for the best ONE car to get all my stuff from.

    I'm thinking Mid-70's Chevy Nova? Impala? Am I close? I did see an 86 Caprice with a 305/auto for $500 that ran great.

    Any thoughts? I know you all probably know this stuff already, but I'm a newb, so my apologies.

    Thanks.
    Pete
    1930 Model A 5-window coupe... in progress.

  2. #2
    Itoldyouso's Avatar
    Itoldyouso is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    fort myers
    Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
    Posts
    11,033

    Some real advantages to doing it this way. You figure, one car drives up and you start transferring parts to the other car. Plus you get the advantage of being able to drive the donor for a while to see how it runs.

    Mid '70's something mid-sized would probably be best, as the rear axles are sometimes too wide under a Caprice, or similar. But if you are going to channel the A deep, you may actually need a wide rear axle to clear the body when it gets dropped.

    The one pain is storing all of the parts and getting rid of the carcass, but if you have the room, it works and can save you a ton of money. Obviously, you will still have to buy some pieces, like suspension stuff, but you will end up with engine, trans, driveshaft, rear axle, wiring, and more.

    Post some pictures as you go, it will be a great tool for others who are thinking along the same lines.

    Go for it.

    Don

  3. #3
    lakota is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2004
    Location
    Elmendorf (San Antonio)
    Car Year, Make, Model: 52 Ford F-1, 327 Chevy, S-10 frame
    Posts
    206

    If you're going to do a Rat Rod, then do it right. Put whatever money you have into safety. Brakes, steering, and suspension are your first priority. As far as a drivetrain, choose whatever fits into your budget. I've learned through the years that Chevy is the cheapest, simply because it's plentiful. Also, most of the parts are interchangeable throughout the years. Ford on the other hand is cheap, but not like Chevy. They're a little harder to find. Interchanging parts on a Ford gets a little tricky. You can still use a Ford rearend with a Chevy eng/trans/driveshaft. They make a universal joint to join a Chevy driveshaft to a Ford rear. Mopar is another story. Unless you have every part needed on hand, you may end up doing a lot of searching, and buying of expensive aftermarket parts. Remember, it's going to be a Rat Rod, you want it to look like it's held together with bailing wire and bubblegum. And that's the whole point. You want it to LOOK that way. Underneath all that crap, you want it safe. Make the Rat Rodders proud.
    Last edited by lakota; 04-25-2006 at 11:10 AM.
    52 Ford F-1, 327 Chevy, S-10 frame

    My website:
    www.geocities.com/lakota_circle_dancer/swap1

  4. #4
    PeteRatCoupe is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2006
    Location
    BOSTON
    Car Year, Make, Model: Not Yet
    Posts
    11

    Thanks a lot guys. I guess I'm on the right track then with a midsize. I'll try to get some more info on dimensions of axles and stuff before I go too far.

    While I'm not safety neurotic, I 'do' want the car to be safe, at least as safe as a car held together by wood can be. :|

    Won't have the 30 at my place until this weekend. I'll try to post some pics when I can.

    Thanks again.
    Pete
    1930 Model A 5-window coupe... in progress.

  5. #5
    lakota is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2004
    Location
    Elmendorf (San Antonio)
    Car Year, Make, Model: 52 Ford F-1, 327 Chevy, S-10 frame
    Posts
    206

    Hey Pete,

    What part of Boston are you from? Beantown is my old stomping ground. Educated at Wentworth and UMass. Worked on Court street. Lived in Norwood.
    52 Ford F-1, 327 Chevy, S-10 frame

    My website:
    www.geocities.com/lakota_circle_dancer/swap1

  6. #6
    PeteRatCoupe is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2006
    Location
    BOSTON
    Car Year, Make, Model: Not Yet
    Posts
    11

    Iakota,
    Cool, man. I'm between Worcester and Boston. Went to school at ULowell and WPI. Small world.

    You've got a nice place in San Antonio as well - Alamo and the riverwalk. I've spent a few nights there as well.

    Pete
    1930 Model A 5-window coupe... in progress.

  7. #7
    lakota is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2004
    Location
    Elmendorf (San Antonio)
    Car Year, Make, Model: 52 Ford F-1, 327 Chevy, S-10 frame
    Posts
    206

    I left Boston in 1965, but kept returning to further my education. Boston and Cambridge are a great place for colleges and universities, but I can't handle the weather. Anything below 70* is frigid to me. Here in San Antonio we have four seasons...Almost summer, summer, still summer, and Christmas. Boston has only two seasons...Ten months of winter and two months of damn poor sledding. Anyways...Have you started on the model A yet?
    52 Ford F-1, 327 Chevy, S-10 frame

    My website:
    www.geocities.com/lakota_circle_dancer/swap1

  8. #8
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423

    Here's a pretty good site for finding different dimensions. I agree that it would be neat to get everything from one donor car, but don't sacrifice a good rear end just because it's an 8" Ford (for instance). The 8" will hold up to a Chevy V8 better than most of the wimpy Chevrolet rears you'll find in the smaller cars.
    http://www.teufert.net/other/rear%20...dimensions.htm
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.

  9. #9
    Itoldyouso's Avatar
    Itoldyouso is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    fort myers
    Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
    Posts
    11,033

    Richard is right, there is a reason the 8 and 9 inch are the most popular for these sort of swaps...................they fit well. Plus, most of them come with simple brackets to hold leaf springs, so you have less to torch off to get them ready for coil overs or a traverse spring setup.

    There is a u joint that is 1/2 chevy and 1/2 ford, so you can use your chevy driveshaft and mate it to the ford rear axle.

    These rear ends were put under every mid sized ford from the mid 60's to the late 80's, so there are tons of them out there, and cheap, too.


    Don

  10. #10
    PeteRatCoupe is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2006
    Location
    BOSTON
    Car Year, Make, Model: Not Yet
    Posts
    11

    Thanks for all the help guys!

    OK - so the plan sounds like:

    A used rear axle - Ford 8" or 9"
    And a chevy donor car for motor, tranny, driveshaft, wiring, etc.

    I'll be looking for highway gearing - I'm just building a driver, not a high performance rocket, so I'm not looking for 4.56 gears or anything. highway rear axle - 2.73, 3.07...

    What would be a good donor Ford car for a rear end - to fit the rear of a Model A coupe? Maverick? It seems most of the cars in my local u-pick-it yard are 80's and up, so I'm not sure how many Mavericks I'll find. Newer is probably better - what would be a good modern donor for a rear?

    That plan's probably better, actually, because then the donor shell will still be on wheels for the scrap man to take away.

    Pick up the A on Saturday. Pics to follow.

    Yeah, the weather up here is crappy. But, my family is here, and there's more to life than cars. My HotRodChick and I sit by the fire most of the winter.

    Thanks again
    Pete
    1930 Model A 5-window coupe... in progress.

  11. #11
    Aster's Avatar
    Aster is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2005
    Location
    CC
    Car Year, Make, Model: 30 Ford Coupe
    Posts
    110

    Your donor car should have a SBC, Ford rearend, mopar disc, early GM calipers, small bucket seats out of a Fiero or such 15" Chrysler wheels and well....I guess you get the idea HUH?

  12. #12
    PeteRatCoupe is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2006
    Location
    BOSTON
    Car Year, Make, Model: Not Yet
    Posts
    11

    Pics!

     



    Here are the pics! It's going to be a long slow road, but man, this thing is too cool.

    Pete
    Attached Images
    1930 Model A 5-window coupe... in progress.

  13. #13
    Itoldyouso's Avatar
    Itoldyouso is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    fort myers
    Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
    Posts
    11,033

    Wow!!! Great start. These coupes ARE cool, and yours looks exceptionally good.


    Keep posting pix.


    Don

  14. #14
    brianrupnow's Avatar
    brianrupnow is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    Barrie-Ontario-Canada
    Car Year, Make, Model: 1931 Roadster Pickup
    Posts
    2,016

    An S10 Two Wheel Drive PicKup Rearend Is The Perfect Width For A Model A With Fenders. Thats What I Have Under My Roadster Pickup---brian
    Attached Images
    Old guy hot rodder

  15. #15
    Aster's Avatar
    Aster is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2005
    Location
    CC
    Car Year, Make, Model: 30 Ford Coupe
    Posts
    110

    Your going to love building that car. Now, you have to set up your shop with TV, refrig, stereo, A/C, heat, nice chairs,microwave, coffee pot and all the other essentials that are required, oh yeah, you'll need some tools and stuff too but, you can get those later. Seriously, when you get ready to lift the body off be sure to reinforce it on the inside. Are you planning to box this frame or sell out, oh, I mean buy a manufactured frame? You probably have a build plan by now so.....let's here it.

Reply To Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink