Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
  1.    Home · Search · Register

  1. Home » Club Hot Rod Member Galleries » NVRRDUNN
    Photo Options
    • Print View
    1. added_rear_diagonal_braces_2_.JPG
      aaron_grinding_motor_mount_jig_in_position.JPG
      Aaron_bead_blasted_these_59_corvette_valve_covers_for_me.JPG
      hot_rod_after_top_chop.JPG
      upper_grille_struts_installed.JPG
      mocked_up_ac_hoses_to_check_fit.JPG
      ac_hoses_routing_at_compressor.JPG
      slicing_and_dicing_on_the_coupe_top_9_.JPG
      slicing_and_dicing_on_the_coupe_top_8_.JPG
      slicing_and_dicing_on_the_coupe_top_1_.JPG
      slicing_and_dicing_on_the_coupe_top_5_.JPG
      slicing_and_dicing_on_the_coupe_top_10_.JPG
      hot_rod_after_top_chop_6_.JPG
      hot_rod_after_top_chop_7_.JPG
      hot_rod_after_top_chop_5_.JPG
      hot_rod_after_top_chop_3_.JPG
      hot_rod_after_top_chop_4_.JPG
      hot_rod_after_top_chop_2_.JPG
      hot_rod_after_top_chop_1_.JPG
      rear_view_of_floor_and_partition_panel.JPG
      coupling_nuts_for_gas_tank_brackets.JPG
      		more »

      « Previous image · Next image »

      ac hoses at condensor mock ups
      ac hoses at condensor mock ups

      Click on image to view larger image

      « Previous image  · Slide Show · Next image »


      Photo Details
      NVRRDUNN




      CHR Member

      Registered: November 2004
      Location: eugene
      Posts: 24
      users gallery
      checking mock up fit of ac hoses...at condensor to drier
      · Date: · Views: 3,406
      · Filesize: 40.1kb, 146.4kb · Dimensions: 640 x 480 ·
      Additional Info
      Quick Rate: Poor Excellent
      Keywords: AC
      Linked Thumbnail:
      Linked Medium:
      Medium Image:

  1.    1:14am
    1. patconor
      Banned

      Registered: October 2010
      Location: Georgetown
      Posts: 21

      If a hose splicer simply will not fit in the hose, check the car's AC hose specifications. If the specifications are correct, try heating up the hose with a few passes of a lighter to warm the plastic. Do not overdo it, as the hose will melt when exposed to continuous flame.
      This user is offline Click here to see this users profile Click here to Send this user a Private Message Find more posts by this user Visit this user's gallery  


Photo Sharing Gallery by PhotoPost
Copyright © 2007 All Enthusiast, Inc.

Links monetized by VigLink