Edelbrock Carb

I'm looking for a 650 cm electric choke edelbrock carb, I want like that polished look. Does anyone know where the cheapest place is to get one?

dont know abought the cheapest place to get one but LMC TRUCK has them for sale in there catalog lmc.truck.com

www.LMCTRUCK.com they also have free catalogs

ok for the 600 cfm electric choke and its polished costs $429.95 and shipping and handling.

the 795 cfm edelbrock electric choke not polished cost $749.95 and shipping and handling you can probly find them both cheaper tho

Got a 600cfm edelbrock withelectric choke that only has 300 miles on it. Looks new. Edelbrock #1406.

Hey Truckguy I see you use LMC. I havn't had the money to get anything from them yet.
Back to the subject my61chevy. Have you tried O'Reilly Auto. They have pretty good prices on Edelbrock. I got a 600cfm with mech choke for $229. Thats not too bad. I would say go to there site but no performance parts are listed.

Ebay

Quote:

---

Originally posted by 71nova
Ebay

---

Check with the edelbrock site they use to have remanufactured ones they are new and new warranty for less. Ed

You can check summit I bought a remain for 180.00 a couple years ago.

Hey 61 chevy what ya doing hopin up your 6 banger :p

Summit no longer carries reman edelbrocks.

Quote:

---

Originally posted by jramshu
Hey Truckguy I see you use LMC. I havn't had the money to get anything from them yet.

---

yeah me either i only got a set of hinge pins for a 65 chevyshort stepside when it was mine:CRY: but i sold it for $400 and bought my 72 with the money:p

No im not hopping up the 6 :):):) i have a new engine im dropping in it this winter, and the only thing its missing is the carb and a power steering pump. But yeah i will just keep looking around. It has to be polished carb though, if you saw the engine you would understand :). But thanks guys you all brought of places i haven't checked.

summit has them for like $285 i think

you know you could save you some money check your wrecking yard you may have to rebuild it and polish it they can be a pain in the bleep bleep to polish and to rebuild but If your like me on a low budget lot of my parts on my 65 were from wrecking yards like carb, alt and etc I bought a carter comp series carb for $50 after rebuild and polish I only had $100 into it that not including my labor but hey after it all done and its looking fine you for get about the labor part well except for your arm hanging to the ground:LOL:

you ever wax a semi your arm really hang to the ground then lol

sounds like a good ideal to me