Hybrid View
-
08-02-2012 02:05 PM #1
Ford FE aluminum 4bbl intake manifold
any aluminum manifold will be considered, provided it is in good working order.
-
08-02-2012 03:06 PM #2
Should we assume that your looking to buy one? You know what happens when we assume something right? 8-)
If your looking to purchase a used FE intake, try these folks, http://www.network54.com/Index/10214
.
-
08-04-2012 08:24 AM #3
nice site, how do I
reply to old posts using the search engine? This is all the info available on this post. I did a search, and everything past the first page seems to be dead. see copy and paste below*
I have emailed a few others, thank you
*Offy 360 View thread on Jul 22, 2012 10:54 AM
If your looking for an Offy 360 FE intake, my car currently has one on it, and I will be changing to a Blue Thunder shortly. If your not in a rush for an intake (might be more than a month before I get to the swap, we can discuss price/trade. My eLast edited by 662doorgalaxie; 08-04-2012 at 08:40 AM.
-
08-04-2012 10:00 AM #4
I am un-sure but maybe you need to join?? I haven't been a regular over there in quite some time..
-
08-08-2012 03:45 PM #5
Thank you,
Found what I needed!!
-
08-08-2012 05:10 PM #6
-
08-17-2012 06:05 AM #7
things like water nipples for manifolds and water pumps are in the Doeman type stuff at the real auto parts stores
-
08-17-2012 06:46 AM #8
I'll check
thank you
BTW, this little town only has one "parts" store, they also sell feed and horse tack!
-
08-18-2012 08:19 PM #9
ok, where do I find this tube?
out of ideas, any help here? thank you, 66
-
08-19-2012 03:01 AM #10
On your other thread re; the same topic.. do you have a local machine shop? ask them to duplicate it.. or do you have some micrometers? get measurements and maybe "we" can find one...
-
08-19-2012 05:59 AM #11
Jerry missed a key in his reference - should be Dorman, not Doeman - Dorman Brand Products | O'Reilly Auto PartsRoger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
-
08-19-2012 11:04 AM #12
I did not think this wqas going to be so tough.
I will call edelbrock monday and see if they will help.
No machine shops around here,, and no micrometers either.
-
08-20-2012 06:41 PM #13
Now mix in She Who Must Be Obeyed....
You better hurry and get that car running!
.
-
09-02-2012 09:58 AM #14
got the nipple from edelbrock
gooped it up, and tapped it in. I have decided to pay someone to install it for me. I have had enough drama.
BTW the one whom must be obeyed left us 2 years ago, now I'm waiting for a new one.
I've had a lot of BIG things happening to me lately but now I'm back to working on the car some, it feels good! The tranny mount was bad and that helped put everything back where it should be....
SB distributor won't fit