496 BBC stroker parts

[aeppy]

Does anybody have any parts for this? I am looking for a 4340 steel crank in a 4.25 stroke, forged pistons up to .060 over, some h-beam rods, cam in the 250 @ .50 duration range, aluminum intake dual plane.

[pat mccarthy]

i see you were looking for 6.700 rods .so your using them rods for a 496 ? then you are building a talldeck 10.200 block so you need a CH of 1.350 i have some roller cams but nothing that small 268 @ 050 .so your looking for use parts ? i will tell you that there a very good chance that your will be getting someones old problems .cranks are not that much new same for rods as a buyer of used parts and having a machine shop some of this stuff needs to be free to rebuild it . new rod bolts like ARP2000 are 130.and then there the pin end bushings$$ and recond the big end then cc them put all new bushing in then pin fit. my cost new rods are under 350 new . same thing with a used cranks check for cracks. welded ? bent ? reground ? or junk that someone want to get some coin for and welds a busted crank regrings it sell it on E bAY look out.. peace of mine i stick with new parts . less you know what your looking at

[aeppy]

Can I get your phone number?

The 496 I am building is for a monza project and it is a short deck block. The 6.7 rods are for a ford 557 ci project I am building for a fox mustang.