Looking for a good 48-52 F1 steering box for my 29 coupe project.
Brian
Printable View
Looking for a good 48-52 F1 steering box for my 29 coupe project.
Brian
They show up on Ebay often, here's one on there now.
http://cgi.ebay.com/ebaymotors/1948-...Q5fAccessories
There may be more too, but this is just the first one I came across.
Don
Thanks - Ive been watching them on there. I am on a budget, trying not to drop 150-200 on an unseen condition box. May have to though ...
I know what you mean. I have two of the later 54-56 boxes, one in my 27 and one for my 29 rpu someday project. Years ago I tore the one for the 27 down to rebuild it and found the worm shaft was bad. That was only a hundred bucks or so, but if the pinion shaft was bad that would have been in the $ 400 range, and that was 20 years ago prices.:eek:
I think you might find that the current going rate for these is somewhere in the range you quoted, and being truck boxes they were subjected to less than careful use and good roads, so they can be a little sloppy internally. Start hitting the swap meets too.
Good luck.
Don