I need a chevy 350 with 2 bolt mains for $250 or less. must be in new york. I live 17 minutites north of Hunter Mountian, preferably within a 3.5 houres drive from there.
Printable View
I need a chevy 350 with 2 bolt mains for $250 or less. must be in new york. I live 17 minutites north of Hunter Mountian, preferably within a 3.5 houres drive from there.
Please dont get mad if i dont buy an engine just yet. I am just getting idea's right now and when I decide to buy an engine I will have to run the deal by my mom because she would be the one truckin me whereever to get it, My dad wants me to use the 267 I have but I know there is no preformance potential for that.
where is that? I have several let me know
sooo, my advice, disquise that sucker. Paint it the same color, use the valve covers off the 267 and he shouldnt know the difference for a while. Or, at least till he drives it. :LOL:
The only reason i need a speedy car is for one reason. That reason being is I want to be able to go to a good Mechanics school because I want to have a career in hotrod building. I could put this car down on my application with pictures and it should help me through the doors + the diesel benz motor is shot. when my dad bought it it smoked a little to much and he used the head on his identical car except 4 spd and diffrent color. The engine has sat without a head on it since mid summer. I will not be driving this car as a driver just a summer weekend car.
Ratty, I live in the catskill mountians in a little town called Prattsville NY. I live about 1 hour 15 minuites from albany NY.
How is that 350 going to work with the current differential ratios? I know nothing about Mercedes, but I know that a diesel is a torque motor that loves low ratios and a 350 is a hp motor that loves high ratios.
I dont know but madgrinder says it will work, if not al get the gears out of a 560sel differential as they are the same differential besides the gearing inside. a 560sel or 560sl have 5.6L V8's. I also belive that Mercedes gears there cars up or down in the transmission, so the differential gear ratio may be the same or near the 560's rear end gearing.
matt, your far from me in chicago but heres some info this is a web site for chev to swaps that are kinda interesting might shed some light on your swap www.jagsthatrun.com. Your 240D and the 220D should have a 3.92 gear in it which is nice for cruising and getting out of the hole if you run a 700r4 overdrive behind whatever v8 you choose rather than the th350 your current donor probly has. I did find run across the fact that 280s, se and sels had options of 3.92, 4.08 and 4.27 gears a 380 sl had 2.47's the 450sl and sel had either a 2.65 or 3.06 set of gears, I am unsure if they are interchangeable but I would stick with what you have just my opinoin.
That's good advice. My transmission is a 200- R4, is that good? The diff ratio seems close enough to the 3.73 ratio in the donor dosent it?
Thats should be able to work with a 350. However, are you going to be able to match up a tranny gearset to your speedo? Normally, this wouldnt be a problem, but how exactly does german and american match up? anyone?
gettting the speedometer gears for a 4.10 rear end, this should be within 10 miles an hour
I would get the one for 3.73, cuz its going to read your going fast than you really are and probly help you from speeding more than you have to, are you sure its a 200r4 and not a th200 what year was the donor car again?
The donor car is a 1981 chevy impala. On sites that are for impalas they say impalas ither came with a th350 or a mectric 200. The th350 was used on all 350 imp's and some 305 imp's with special packages such as the police package but the 267 came with the 200 metric. When i researched this transmission it came up to be the 200R4, weather or not this is correct information i do not know. I do however belive the engine ( 267 ) is computer controlled because there must be 40 wires running between the intake manifold, carb and what i belive to be a vacume cylynder that reads "Rochester". I think this is somthing for the carb as the carb is a "Rochester" and the two hoses coming off of it run to the carb. All of these wires lead back through the firewall from what i can see as the hood opens less than half way as the car was in a bad accident and it bent up the driver side hinge.
what does your shift indicator read because the th200 has a one peice case where the tail shaft housing the trans is part of the case it doesn't bolt on, it says metric on the oil pan stamped across, if its a 200 your shift ind. will read PRND21 if its a 200r4 it will read PRND321 because the 200r4 is a 4spd overdrive unit. I have seen th350 swaped in place of both before do to availability and reliability so it could be a guess if this thing has miles the fact that the electronic rochester junk is still there means it might be what its sapose to.
The carb, is is dualjet or quardrajet? If its the factory 2 barrel, which are complete trash, its usually a rather good indicator that they diddnt modify much.
I have a digital camera and would like to post pictures but when i click to add a picture and submit reply after a while it says sonthing like request timed out and it wont post. I think my internet connection is to slow.
The impala donor only has 120,000 on it's odometer
The transmission is a Th200. I checked the shift indicator and it read PRND21. The donor is 99.99% stock, In fact the only things that i think are not stock are shocks and brakepads and there are no drivetrain mods.
Neutrals such a useless gear anyway streets..:3dSMILE: j/k sometimes my brain thinks faster than my hands can type or visa versa, I fixeded it.Quote:
Originally posted by Streets
OMG man.... No Neutral at all?? hehehe:p
I also think that "Matt167" needs to buy a digital camera and post pictures...
yeah pics would be good....you should be able to post them I can post pics and I am runing a pII 300m wi only a 33k connection speed...talk about old tech.
I'll try posting pics again.
I would never send 3 foot wide pics, my digi camera is only 2.1 megapixles
[what's up, I have a chevy 350 but I live in MA, reply back to me if you want. I say put a chevy in anything and everthing.
How much you want for it? how many horses are we talking? Is it compleate from carb to pan? I may drive down to mass if the price is right.
All I want is $ 50.00 it's just the block with I think the stock crank, pistons, cam, everything but the intake, and carb. It probably has to be rebuilt the person I got it from said that it smoked. if your interested let me know
I'll try to let you know my descision soon. I would let you know sooner but I have to talk it over with my mom and dad.
Hey Matt take your time, it's not going anywhere just keep me posted
will do, I just want a fair to good 350 to power my Benz with in my Benz powertrain transplant project. Just out of curiosity about how much does it cost to get a motor rebuilt, do you know?
Is the motor togther or apart? does it have a starter, heads and water and oil pump?
You can buy a brand new 4-bolt Chevy 350 minus a few parts such as intake, carb, and distrib. from GM for $1,300. Rebuilt engines usually run about $950 pluse a $200 core charge.
Thanks for the info but, I was looking for a used motor in the 50- 250 dollar range.