vortec parts

[eric1231]

I am looking for a set of vortec 062 heads, edlebrock rpm air gap vortec intake #7516, edlebrock 750 performer carb #1407, comp cams hydrallic roller cam XR282HR-10, or XR276HR-10, and a 383 kit.

[FMXhellraiser]

If you are looking for used stuff then check with Summit and/or Jegs on the remanufactured carbs. Summit I think is the one with Remanufactured Edelbrock carbs. They are like half the price or some deal like that. Just a note of thought.

[89vetter]

a very good friend of mine has an engine machining shop and he is getting out of the biz. he has so many chevy blocks and heads it aint funny ill call him up and see what i can do......

[FMXhellraiser]

Do you live in Riverside California? If so then whats your friends shop name? I used to live in San Bernardino right near redlands and Riverside. My father knew a ton of shops around there.

[76GMC1500]

Don't forget valve springs. Your stock Vortec heads aren't going to work with that cam. I suggest you buy some of the premodified ones from Scoggin Dickey or Summit Racing.

[89vetter]

my friend at D&R machine shop said that the cam/intake match doesnt make much sense 7116 performerII i think is what he said, none the less he has a brand new set of heads or he has a used set he will dress for you,also he has a machined block ready for building or he will dress it for you. this guy is real cheap he just did a stroker in my buddies impala and he is very happy. anyway dennis has a crap load of 350. 327,396,427 blocks heads he has too much stuff to mention. if you want send me a phone # and ill hook you guys up.the new heads were like 700$ used fresh built 500$ machined bare block 500$ hope this helps. Eric P.S. im not an engine guy im green dennis been doin it 40 years though.