Hybrid View
-
02-19-2009 06:46 PM #1
331 Chrysler Fire Power Hemi (SW Michigan)
331 Chrysler Fire Power Hemi for sale. This was removed from a 1954 New Yorker and is the later version WITHOUT the extended bellhousing. Motor number is C542-8-****. This is an original 4 barrel motor rated at 235 HP. Motor is not stuck and is complete from carb to oil pan. It still has the original auto trans attached. Has one broken exhaust valve. Generator, starter and power steering pump also included. $1500 OBO. CTJ
hemi 014.JPGChopTopJimmy
Always looking for Model A bodies and frames in good shape...
-
02-22-2009 04:56 AM #2
Back to the top.ChopTopJimmy
Always looking for Model A bodies and frames in good shape...
-
02-22-2009 11:58 AM #3
What do you mean by one broken exhaust valve? Did it drop a valve?
-
02-22-2009 01:21 PM #4
valve 001.jpg
valve 002.jpg
valve 008.jpg
valve 009.jpg
Alot of people have asked about the broken exhaust valve and doubted that it was the only damage. The valve was broke when the previous owner tapped on it (with a Hammer!!!) to break it free. Attached are a pic of the head in question and the valve is sitting on the corner of the head. Also attached are pics of the cylinders/pistons. I can vouch that every cylinder is smooth, every piston is in good shape with no damage, that the motor turns over freely and there are no stuck valves. I will remove the heads for any prospective buyer to inspect the condition of this motor. Any other questions please PM me. Thanks, Jim.ChopTopJimmy
Always looking for Model A bodies and frames in good shape...
-
02-25-2009 01:54 PM #5
Still available.ChopTopJimmy
Always looking for Model A bodies and frames in good shape...
-
03-03-2009 01:30 PM #6
Broken valve has been replaced. Price is firm CTJ.ChopTopJimmy
Always looking for Model A bodies and frames in good shape...
Like Mike/34_40 I have no direct experience with DUI distributors but I trust Glenn's experience. Their TriPower setup (which Glenn Recommended) looks to be OEM pre-HEI size. For your radiator, the...
SB distributor won't fit