Procharger Setup for SBC and BBC

Printable View

09-15-2007, 11:58 AM
camaro_fever68

2 Attachment(s)

Procharger Setup for SBC and BBC ""SOLD""

For sale is a Procharger P600B in excellent shape. Blower has less than 500 miles. It comes with brackets and pullies for small block Chevy and big block Chevy. The sbc setup is 12-rib and the bbc setup is 8-rib. It comes with crank pullies and compressor pullies. The 12-rib compressor pulley is 2-3/4" and should produce 12-15 psi on a stock 350cid. The 8-rib pulley is 3-3/8" and should make about 8 psi on a stock 454cid. The blower is in great shape with no shaft end play and the impellers are perfect. ATI rates the blower at 1200 CFM and 775hp. I'm selling because I'm going twin turbo and don't have any use for the blower. Any questions, just call or message.

Price- $1400.00

Ray

SOLD
10-01-2007, 08:49 PM
brickman

Just curious if used on a sbc, what would be max compression you could have and what would be the size of the carb you would need?
10-02-2007, 08:34 PM
camaro_fever68

Quote:

Originally Posted by brickman

Just curious if used on a sbc, what would be max compression you could have and what would be the size of the carb you would need?

These superchargers work best with 8-9:1 CR's. 9.5:1 has been done on low boost but isn't recommended. The carb size would be about the same as naturally aspirated.