Results 1 to 14 of 14
LinkBack URL
About LinkBacksThreaded View
-
10-16-2004 04:42 PM #9
CHR Member
- Join Date
- Oct 2004
- Location
- montgomery
- Posts
- 4
do not follow don meyer's instructions, use your body filler BEFORE you primer, it is best used on bare metal. Grind the surface with a 24 grit sanding disc and apply your plastic, use fiberglass resin to get a smoother easier to sand finish. Sand with 40 grit sand paper, do not use any higher than 80 grit, prime with DP epoxy primer and it will help fill the 40 grit sanding scratches, then spray with ppg's K36 primer surfacer. This will be the easiest way and will turn out the best. But it will cost more for DP and K36, There is another option which is ncp271 also made by PPG. It is a primer/primer surfacer, does the job of DP and K36 at onceLast edited by mgbgt; 10-16-2004 at 04:46 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Dammit, another good ol boy gone. Condolence to the family. RIP Mike
RIP Mike Frade, aka 34_40